Valentine’s Day Heart Art

Out of all the holidays, I think Valentine’s Day has the prettiest decorations. Even when I was single, I still enjoyed seeing the warm reds and pinks, and cute heart shapes. A few years ago I started reposting Valentine’s Day themed photos on my blog. In 2012 I decided to post my own work, and have been doing so since.

This is my Valentine’s Day Kusudama.


No, I didn’t make three. These are three photos from different angles.

I made these ceramic heart shaped boxes, not necessarily for Valentine’s Day, but because I wanted to make a heart-shaped box. When I first signed up for the ceramics class in 2009, I envisioned a porcelain box, but that never happened, since I had to work with regular old stoneware clay. Anyway, I’m still making stoneware nowadays. I made these using B-mix with grog (because that’s what I have, but I probably don’t need the grog since I’m making fine, small objects.)


The pink one was traced off of a small plastic heart shaped box, whereas the red one was drawn freehand.


Tops and bottoms.

Unfortunately, the pink parts blistered during the glaze firing, and the tiny bumps look gross. (You can see some popped bubbles in this image.) My guess is that the bubbling had something to do with the pink underglaze, because only the pink parts blistered. (All of it was covered with a clear glaze, and the clear parts were fine.) From what I’ve read online, it’s possible that I had applied the underglaze too thickly, or it could have had something to do with this piece being fired at the bottommost shelf of the kiln, or maybe it was because the label of the underglaze said to fire to cone 4 and the studio fires to cone 6. I might try to sand off the bubbles and reglaze it, but using a different glaze. I was sad that that happened, because I had spend a lot of time shaping the lid. It was hard to get it to curve and fit properly at the points of the heart.



Heart shaped feet on the bottoms. My idea!

I wish I could say this was my idea, but it isn’t. Two years ago I saw a friend post a photo on Facebook of tealight candles arranged into a heart. Her boyfriend did that for Valentine’s Day, and I’ve been wanting to give it a try.


These were cheap IKEA candles, which explains the variation in the candle color (they’re all red) and size of the flames.

Autumn Kusudama Centerpiece

Over the course of this year I have been making Kusudama balls, and I was left with paper in colors that I wouldn’t normally use: orange, brown, and yellow. Luckily, they go well together and are fall colors. I also added some red and golden-yellow, which (in hindsight) goes better with the other colors than the bright yellow. Instructions for making a kusudama flower can be found here.

With Lee Bay, of course!


I was going for a dusky look, but it may have been too dark.


With Lee Bay, of course!

Mini Kusudama Flowers

Some of you may have seen this when I posted it on Xanga a few years ago.

According to the instructions, kusudama means medicine ball.

The petals are made separately and then glued together. Folding the petals is rather simple. The hardest part was gluing the petals together, especially when it came to the third and fourth ones.

My smallest one. It measures about 6mm at the widest points and 2mm at the narrowest part.

When I folded my first one (not pictured) out of 0.5″ by 0.5″ squares, I noticed that it ended up pretty large (for something intended to be tiny), so I made a second one out of 9mm by 9mm squares. I felt like it could be even smaller, so on my third try, I used 0.25″ by 0.25″ squares for each petal. It might be possible to make an even smaller one, but it would have to be made from thinner paper, since the folds were already rather thick.

These were made from a strawberry Starburst wrapper. The hardest part was cutting the squares, since they had to be almost perfect. At that size, fractions of a millimeter matter.

I used a toothpick to open up some folds when making the smallest one. Aside from that, my fingernails did all the folding.

Posted 4/12/2011 at 4:40 PM